buy HDPE pellet / HDPE raw material
| Create Date: | 29 Jun 2009 |
|---|---|
| Expiry date: | 16 Jul 2010 |
Online Postings: Products
Country/Territory: China (Mainland)
Business Type: Manufacturer
Number of Employees: 501 - 1000 People
General Information
PE 5000S Polyethylene, high density,
General | |
Material Status | l Commercial: Active |
Availability | l Pacific Rim |
Test Standards Available | l ASTM l ISO |
Uses | l Netting l Rope l Tape |
Forms | l Pellets |
Processing Method | l Extrusion |
ASTM and ISO Properties ¹
Physical | Nominal Value | Test Method |
Density | 0.950g/cm³ | ISO 1183 |
Melt Mass-Flow Rate(MFR) | 0.82g/10min | ISO 1133 |
Enviro. Stress Crack Res (Compression Molded) | 30.0hr | ASTM D 1693 |
Mechanical | Nominal value Unit | Test Method |
Tensile Stress at Yield (Compression Molded) | 3920 psi | ISO 527-1,-2 |
Tensile Stress at Break(Compression Molded) | 2180 psi | ISO 527-1,-2 |
Tensile Strain at Break(Compression Molded) | 450 % | ISO 527-1,-2 |
Flexural Modulus(Compression Molded) | 174000 psi | ISO 178 |
Impact | Nominal Value Unit | Test Method |
Charpy Notched impact Strength | 6.66 ft·lb/in² | ISO 179 |
Hardness | Nominal Value Unit | Teat Method |
Durometer Hardness(D Scale, Compression Molded) | 63 | ASTM D2240 |
Shore Hardness(Shore D, Compression Molded) | 63 | ISO 868 |
Thermal | Nominal Value Unit | Test Method |
Brittle Temperature(Procedure A) | -76.0 | ASTM D746 |
Brittleness temperature | -76.0 | ISO 974 |
Vicat Softening Point | 253 | ASTM D1525 |
Vicat Softening Temperature | 253 | ISO 306 |
Peak Crystallization Temperature(DSC) | 268 | STM D3418 |
Peak Crystallization Temperature(DSC) | 268 | ISO 3146 |
If you are the supplier for HDPE raw material, please kindly contact Mr.Jason WANG by Telephone 0086-10-68796570, fax 0086-10-68796686.
Company Info
CNBM International Corporation
[China (Mainland)]
[Verified Member]
Province/State: Beijing
Country/Region : China (Mainland)
Business Type:Manufacturer
Online Postings: Products